WOOD Products

Tools:Brush, Roller, Spray
Apply 2 even, liberal applications of AQUATROL® wet-on-wet.
Apply 1st liberal application of AQUATROL® and allow to penetrate into the wood.
Apply 2nd application as soon as the milky appearance of the 1st application has disappeared (normally 15-30 minutes)and allow to penetrate into the wood.

• Surfaces must be thoroughly clean, dry and free of dirt, grease, grime, mildew and previous coatings.
• Treat mildew with a 50/50 bleach/water solution. Scrub solution on to surface and allow to stand for 10-15 minutes; rinse thoroughly.
• After cleaning, allow wood to dry 2-3 good drying days or until it has reached a moisture content of 18 % or less before applying finish.
• AQUATROL® may only be applied to bare wood surfaces or a weathered wood surface that was previously finished with AQUATROL. ALL other finishes must be completely and thoroughly removed.
• If necessary sand surface after cleaning and/or stripping (80 grit paper).