WOOD Products

Soft brush.
Stiff bristle/nylon brush.
Powerwasher.
Wear chemical resistant gloves, safety goggles and protective clothing.

Wood, stone, concrete:

• Wet surface with fresh, clean water.
• Apply NET-TROL with a synthetic brush or roller (medium or long pile).
• Scrub surface with a stiff nylon/synthetic brush.
• Leave to stand for approx 10-20 minutes. If surface starts to dry, dampen with a mist application of water.
• Scrub surface whilst rinsing with water or use a pressure washer (max. 60 bar).
• If required repeat procedure.
• Wood - Allow to dry 48 hours or until it meets the moisture content required by the chosen finish.
• Stone & Concrete - Allow to dry until it meets the moisture content required by the chosen finish/sealer.