FLAT VINYL


Finish:

Matt

Coverage:

~10m2/ L/ coat

Size:

1L, 2L, 5L, 20L

Mixing Ratio (Dilute with water)

Roller

15%

Brush

15%

Spray Gun

N/A



Copolymer acrylic paint, having good opacity and coverage. Available in white, pastel and mid-basic colours as per our POLYMATCH SYSTEM.

Usage:
Recommended for interior use only.

Apply two coats by roller or brush onto clean, dry and sealed surface.

  • For concrete and plaster, wash surface with water under high pressure, let dry, then apply one thin coat of Wall Primer (<50 pm).
  • If the old coating and/or its substrate have blisters or other defects, then total removal must be done by mechanical means or by stripping with paint remover. On powder old coatings, apply 1 coat POLYCOLOR CLEAR BINDER.
  • If substrate shows presence of fungi or algae, please proceed with the following surface preparations:
    • Apply POLYCOLOR FUNGICIDAL WASH by roller and leave to react for 12h minimum. Rinse with high pressure water again. Brush if necessary. Once dried, apply a coat of POLYCOLOR FUNGICIDAL TREATMENT on the surface which will be coated the same day. Apply a thin coat of POLYCOLOR CLEAR BINDER where necessary and leave to dry for 3 hours minimum. Apply 2 coats of POLYCOLOR FLAT VINYL paint, leaving each coat to dry 3 hours minimum.


RECOMMENDED PRODUCTS


3100 SET - 2K MS CLEARCOAT + HARDENER + THINNER

Kapci 3100 is a 2K medium solid clear coat especially formulated for applying over Kapci ...

Learn More


CHLORINATED FLOOR DRESSING PAINT

Chlorinated floor dressing paint is based on copolymer of vinyl chloride. Use as protectiv ...

Learn More


BRILLIANT WHITE

High Quality copolymer acrylic white paint, having good opacity and coverage. Product is s ...

Learn More


MATT EMULSION

Copolymer acrylic paint, having good opacity and coverage which conforms to quality standa ...

Learn More