WOOD Products

Tools: High quality synthetic brush, Paint pad (For smooth horizontal surfaces), Synthetic roller, Airless spray
Prior to applying the 1st application of TROPITECH® “ALL IN ONE” ensure surface to be coated is cool to the touch. If surface is hot, cool with water and apply 1st coat of TROPITECH® “ALL IN ONE” to the cooled wet surface.
Remove any puddles of water just before applying TROPITECH® “ALL IN ONE”.
Apply additional coats to a dry surface - DO NOT re-wet surface after 1st application.
Stir TROPITECH® “ALL IN ONE” thoroughly before and periodically during application.
Apply a 1st liberal application of TROPITECH® “ALL IN ONE”.
Allow first coat to dry.
Apply second coat as soon as first coat is dry.
After second coat is dry inspect the finish. If finish has a uniform sheen and lustre, the proper amount of material was applied. If the finish looks blotchy or lacks uniformity apply a third coat of TROPITECH® “ALL IN ONE.

• Surfaces must be thoroughly clean, dry and free of dirt, grease, grime, mildew and previous coatings.
• TROPITECH® may only be applied to bare wood surfaces or a wood surface previously finished with TROPITECH®. ALL other finishes must be completely and thoroughly removed.
• If necessary sand surface after cleaning and/or stripping (80 grit paper).