• For new wood, apply one coat of NC SEALER followed by one or two coats of ALKYD UNDERCOAT
• For old coatings on wood, remove partly or wholly with sanding paper or paint remover. Ensure that remaining old coatings are well adhered to the substrate.
• For metallic surfaces, apply one coat of suitable primer on a non rusted and dry surface. In case of rust presence, use appropriate Rust Remover.
• If the old coating and/or its substrate have blisters or other defects then treat using mechanical means or by stripping with paint remover.
• For substrates that are affected by fungi and algae attack, fungicidal wash by roller should be applied and leave to react for 12h minimum. Rinse with high pressure water and brush if necessary to ensure complete elimination of algae & fungus.
•  

Apply 2 coats by roller or brush onto clean, dry and sealed surface.