Owatrol

Vegafloor


Coverage: ~6-7m2/L/coat
Size: 1L, 5L

VIEW DATASHEET
SKU: pp-97 Categories: ,

Description

VEGAFLOOR® belongs to the new generation of environmentally friendly, water-based products. Quick drying and odourless, it is a single pack waterborne polyurethane resin finish that offers excellent resistance to both mechanical and chemical abrasion. Giving long lasting protection to all wooden flooring subject to normal to heavy traffic use it is ideal for staircases, dining rooms, lounges, and other similar rooms.
Being water resistant, VEGAFLOOR® is the perfect solution for areas of high water content such as bathrooms and kitchens. Beautifying and maintaining the woods natural appearance, VEGAFLOOR® can be applied to all types of wood including exotic hardwoods.

Usage:

  • All wooden floors, new and old including parquet flooring, veneered (engineered) flooring and staircases.
  • All soft and hardwoods including exotic hardwoods.
  • Ideal for:
    – Normal traffic: bedrooms, lounges, bathrooms…
    – Heavy traffic: corridors, stairs, dining rooms, kitchen…

Surface Preparation

  • Surfaces must be dry, clean, free of dirt, grease and other surface contamination including previous coatings.
  • VEGAFLOOR® can only be applied to bare wood surfaces or wood surfaces previously finished with VEGAFLOOR® or a solvent or waterborne floor varnish in good condition.
  • ALL other finishes MUST be completely and thoroughly removed.
  • Always clean meticulously with a vacuum cleaner after each sanding, including any dust traps (skirting, radiators, pipes, window sills, etc).
  • Sand wooden floor using appropriate system and abrasive grades, depending on condition of surface and wood species.
  • Cracks of 2 mm wide or less should be filled with LIANFLOOR®* and sanding resumed with 80 or 100 grit paper depending on the last grit used.
  • Finish with finishing grade up to grit No. 120 or 150 depending on the wood species and thickness of wear layer.

Application

  • Tools:
    High quality synthetic brush.
    10 mm (3/8 inch) Medium pile synthetic roller (Polyamide or Polyester).

 

  • Facing the light and starting opposite the door so as to work towards it, apply a first even and generous coat of VEGAFLOOR®. Always maintain a wet edge to avoid overlaps.
  • Start with a brush at the edges, then do the remaining surface with a roller, working in areas of 2 m by 2 m.
  • Do 3 criss-cross passes in one application.
  • Allow to dry for 4 hours depending on the ambient conditions.
  • Sand floor (grit No. 150 to 180) to dull the surface and aid adhesion of the 2nd coat.
  • Apply 2nd coat of VEGAFLOOR®. Do not leave more than 12 hours between application of the 1st and 2nd coat.

Related products

Subscribe to Our Newsletter

Polytol Paints

© Polytol Paints Ltd 2025. All rights reserved.