• PLASTER – New masonry surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonry surfaces.
• CLEANING – Surface should be free from any loose paint, dust or grease. Remove all existing bitumen coatings completely. It is recommended to use intense wire brushing with Polycolor Fungicidal Wash and Treatment and high-speed water jet for thorough cleaning.
• REPAIRING – The substrate must be checked for its soundness using small hammer. All cracks at corner joints, channels and parapets should be properly treated by using Polycolor Waterproofing Stucco Putty.
• FILLING FOR CRACKS – For filling cracks up to 3mm use Crack Seal. Bigger cracks, damaged portions and hollow areas must be repaired with polymer modified cement mortars.

Method : Brush, Roller
Thinning with : Water
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%.
Adverse conditions in the application can alter the final properties of product.