Owatrol Oil


Coverage: ~18m2/L
Size: 0.125L, 300ML Spray, 1.5L, 1L, 5L

 

SKU: pp-69 Categories: ,

Description

OWATROL® OIL is a versatile, highly penetrating air drying oil that can be used alone or added to paint. Used alone it provides a tough, fl exible fi nish, driving out excess moisture and air; displacing it from rusted metal, so stopping rust. Filling dry porous wood to stop paint peeling. Added to any oil or alkyd based coatings and it will give increased wet edge time, improved fl ow ability, greater adhesion and unlike damaging thinners, will maintain the inherent quality of the paint without affecting its appearance or drying times.

Usage:

  • For interior and exterior use.
  • Steel structures, railings, pipes, grills, stairs…
  • Machinery, engine parts, trailers…
  • Hulls, tanks…
  • All Wood surfaces, dry, porous, soft & punky…
  • Horizontal and vertical surfaces.

PAINT CONDITIONER
Prepare surface as per instructions on the paint can.
Remove all loose and flaking material.
Treat any organic growth with fungicidal solution or a mix of 1 part water to 1 part chlorine bleach (allow bleach solution to sit for 15 minutes), rinse thoroughly and allow to dry.

RUST INHIBITOR
Surfaces must be clean, dry and free from oil, grease and other surface contaminants.
Remove all scale; loose and flaking rust and old paint back to a sound surface and edge.
Feather in any sharp edges.
Surfaces exposed to chemicals (acids, alkalis or salt deposits) should be washed using copious amounts of water or steam cleaned.
Severely contaminated surfaces should be cleaned using an appropriate solvent.
Do not remove firm rust.
Do not clean metal back to a bright finish.

  • Brush.
  • Roller.
  • Airless or HVLP sprayer.
  • Garden sprayer, pump sprayer.

Cover everything you do not wish to paint.
Apply between + 5°C and + 35°C.
Do not apply in direct sunlight or on to hot surfaces.
Test for compatibility when adding OWATROL® OIL to paint.