Owatrol

Oleofloor Classic


Coverage: ~15-20m2/L/coat
Size: 1L, 5L

VIEW DATASHEET
SKU: pp-96 Categories: ,

Description

OLÉOFLOOR® CLASSIC is a waterborne oil, enriched with vegetable oil and combined with polyurethane resins to give a hardwearing, wet look finish. Enhancing the natural beauty of the wood OLÉOFLOOR® CLASSIC with its wet look finish gives a deep, rich, warm feel to any wooden floor while its excellent penetrating qualities means OLÉOFLOOR® CLASSIC nourishes the wood and gives long lasting protection.
Having superior chemical and water resistance OLÉOFLOOR® CLASSIC is the perfect solution for kitchens and bathrooms, while being ideal for staircases, lounges and other similar rooms, where a natural finish is desired. Quick drying and easy to apply OLÉOFLOOR® CLASSIC is the solution, where the quick turn round of a room is needed.

Usage:

  • All wooden floors, new and old including parquet flooring, veneered (engineered) flooring and staircases.
  • All soft and hardwoods including exotic hardwoods.

Surface Preparation

  • Surfaces must be dry, clean, free of dirt, grease and other surface contamination including previous coatings.
  • OLÉOFLOOR® CLASSIC can only be applied to bare wood surfaces or a wood surface that was previously finished with OLÉOFLOOR® CLASSIC. ALL other finishes MUST be completely and thoroughly removed.
  • Always clean meticulously with a vacuum cleaner after each sanding, including any dust traps (skirting, radiators, pipes, window sills, etc).
  • Sand floor back to bare wood using the appropriate system and abrasive grades, depending on condition of surface and wood species.
  • Cracks of 2 mm wide or less should be filled with LIANFLOOR®* and sanding resumed with 80 or 100 grit paper depending on the last grit used.
  • Finish with finishing grade up to grit No. 120 or 150 depending on the wood species and thickness of wear layer

Application

Tools:

  • Short pile synthetic roller.
  • Synthetic brush.
  • Floor applicator pad – synthetic/microfibre.
  • Floor coater.

 

  1. Apply 1 or 2 coats of OLÉOFLOOR® CLASSIC depending on type of wood and foot traffic.
  2. Facing the light and starting opposite the door so as to work towards it, apply a first even and generous coat of OLÉOFLOOR® CLASSIC.
  3. Start at the edge then do the entire surface, working in areas of 2 m by 2 m.
  4. Allow to dry for 4 hours depending on the ambient conditions.

Related products

Subscribe to Our Newsletter

Polytol Paints

© Polytol Paints Ltd 2025. All rights reserved.