Weathercoat


Coverage: ~1.5 – 2Kg/m2
Size: 20Kg Kit

 

SKU: pp-33 Categories: ,

Description

Weathercoat is an economical, permanent waterproofing system for roofs and facades. The system will adhere to new and old surfaces of concrete, bitumen, and tiles. Weathercoat has long-life flexibility and is ideally suited for use in areas with extreme climatic conditions. It is applied by brush or spray and after drying can be walked upon uncovered. After application the Weathercoat system has high resistance to chemical attack, atmospheric pollution, UV light and fire.

Usage:
For waterproofing most building surfaces e.g. roofs, facades, foundations, retaining walls, swimming pools, planters, wet room floors, water tanks, etc.

Surface Preparation

Ensure all dirt and foreign matter is cleaned off the areas to be coated. Remove any ridges or form oil. Dusty or flaking surfaces must be cleaned thoroughly, then primed with Penetrating Primer.

Application

Mix the components in the ratios shown in the table below. Add powder to resin and use a high speed mixer or power agitator until the mix is homogenous. If spraying add enough water to bring to the correct consistency. Apply using brush, roller or spray, leave 3 hours between coats for drying. Mixed Weathercoat must be used within 1 hour of mixing.