• Plaster: New masonry surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonry surfaces.
• Filling For Cracks: To fill cracks up to 3mm use Polytol Terraco Acrylic Crack Filler.
• Cleaning: Surface should be free from any loose paint, dust or grease. Growth of fungi, algae or moss should be removed by wire brushing, Polycolor Fungicidal Wash & Treatment. In areas experiencing excessive dampness, underlying surface exhibits chalkiness. In this scenario use Polycolor Waterproofing Stucco Putty.
• Filling For Holes & Dents: In case of dents and hole use wall putty or white cement and fine sand in the ratio 1:3.
•  

Method : Brush, Roller, Airless spray
Thinning : Water
Dilution : Up to volume ratio (2:1) – 2 parts of paint & 1 part of water