Coverage:
1.5-2.0kg/m2
Size:
20kg Kit
Mixed Weathercoat, 1 resin : 2 powder. DIlute with water if required. Download specifications for detailed mixing ratio.
Weathercoat is an economical, permanent waterproofing system for
roofs and facades. The system will adhere to new and old surfaces of
concrete, bitumen, and tiles. Weathercoat has long-life flexibility and is
ideally suited for use in areas with extreme climatic conditions. It is
applied by brush or spray and after drying can be walked upon uncovered. After application the Weathercoat
system has high resistance to chemical attack, atmospheric pollution, UV light and fire.
Usage:
For waterproofing most building surfaces e.g.
roofs, facades, foundations, retaining walls,
swimming pools, planters, wet room floors, water
tanks, etc.
Mix the components in the ratios shown in the table below. Add powder to resin and use a high speed mixer or power agitator until the mix is homogenous. If spraying add enough water to bring to the correct consistency. Apply using brush, roller or spray, leave 3 hours between coats for drying. Mixed Weathercoat must be used within 1 hour of mixing.
Ensure all dirt and foreign matter is cleaned off the areas to be coated. Remove any ridges or form oil. Dusty or flaking surfaces must be cleaned thoroughly, then primed with Penetrating Primer.
Kapci 3100 is a 2K medium solid clear coat especially formulated for applying over Kapci ...
Learn More
Copolymer acrylic paint, having good opacity and coverage which conforms to quality standa ...
Learn More
Chlorinated floor dressing paint is based on copolymer of vinyl chloride. Use as protectiv ...
Learn More
Kapci 3100 is a 2K medium solids acrylic clearcoat especially formulated for applying over ...
Learn More
